w
Install the front clamp onto the ceiling bracket. The rubber bumper should fit over the tilt button.
Attach the ceiling bracket to the ceiling rod with the two screws. Height adjustments can be made by using different holes on the ceiling rod and ceiling bracket.
vThe total adjustment range is 0 to 1 inches
(0~2.5cm). Adjustment can be made in one inch (2.5cm) increment.
Screws
Front Clamp
xMake necessary roll and yaw adjustments to the projector.
(YAW ADJUSTMENT) | (ROLL ADJUSTMENT) |
180°
±20°
Ceiling Rod
Ceiling
Bracket
±60°
vOpen the
CCopyright
Printed in Taiwan