Maintaining the System

To manage the projector using the on-screen menu

The projector’s on-screen menu is described in detail in the projector manual. However, when you install an attachment module, certain new menu entries are displayed in the on-screen menu.

New menu entries with module installed

Quick choice

Wireless Presenter

Displays information needed by Wireless

 

Presenter-to-Go so it can connect to the projector.

 

 

Input

 

 

 

Attachment module

Shows the input signal from the current wired or

 

wireless presenter.

 

 

Setup

 

 

 

Network

Sets up TCP/IP settings for the wired network port.

 

If the network uses a DHCP server, you must set

 

only the DHCP option. Check with the network

 

administrator.

 

 

Wireless reset

Resets all wireless network settings to default values

 

(only for certain firmware versions).

 

 

Help

 

 

 

About the network

Displays the current configuration of the wired and

 

wireless network ports on the attachment module.

 

The wireless configuration and certain wired

 

settings must be changed using the Web interface.

 

See “To manage the projector from the Web” on

 

page 49.

 

 

48

User’s Guide