HP MSR50 manual Install hex bolts on the chassis as shown in the figures

Install hex bolts on the chassis as shown in the figures.

Align the holes on the opacity shields with the hex bolts.

Apply tamper-evidence labels to opacity shields, screws that secure the opacity shields, field replaceable units (FRUs), USB ports, and air vents on interface cards and filler panels.

Face the front panel, install the front mounting brackets on both sides of the router and secure them with M4 countersunk-head screws, mount the router on a rack shelf (skip this step if the router is not to be mounted on a rack), and attach the opacity shield.

Press the opacity shields against the side panels, and use M3 countersunk-head screws to secure the opacity shields.