Connect to A/V Receiver and TV
1(Color Coded Cables)
1 Connect the Stereo Cable to the Compaq iPAQ™ Music Center audio output and to an available audio input on your A/V receiver* such as CD, tape or auxiliary.
2 Connect the Composite Video Cable to the iPAQ Music Center video output and to an available video input on your television.*
3 Connect the Power Cable to the iPAQ Music Center and to a power outlet.TV
2Composite Video CableInternet Connection
2
Using the Built-In Modem
1 Connect the Telephone Cable to the modem jack.2 Connect the other end to a telephone wall jack.*Note: If a telephone wall jack is not conveniently located near your Music Center, you may consider using a wireless telephone jack system.
or
HPNA Setup
1 Connect the Telephone Cable (with a minimum length of 6 feet) to the HPNA network jack on the iPAQ Music Center. 2 Connect the other end to a telephone wall jack.*
| HPNA Setup |
Power On
3
1 When the LED turns solid red, press the power button on the front of your iPAQ Music Center.
2 Turn on your A/V receiver and select the proper input mode, such as CD, tape or auxiliary.
3 Select the video input on your television that matches the input you used when connecting the iPAQ Music Center.
Welcome!
4
1
iPAQ Music Center
3Power CableA/V Receiver
1Stereo Cable
or
| 1Telephone Cable | 1Telephone Cable |
| 2Telephone Wall Jack | 2Telephone Wall Jack |
Once you’ve selected the correct input on your television, the Welcome screen will be displayed. In just a few moments, you will be able to start enjoying your iPAQ Music Center.
*For best audio performance, use S/PDIF digital audio connections (either optical or coaxial) instead of analog stereo. For best video performance, use
*Use the included telephone splitter if you also want to use a telephone at this location.