HP NC150T manual Installing the Adapter, Overview, Electrostatic Discharge Precautions

2

Installing the Adapter

Overview

This chapter describes installation precautions and explains how to install the adapter. It also describes how to connect the network cable.

WARNING: To avoid the risk of personal injury or damage to the equipment, consult the safety information and user documentation provided with the equipment before attempting installation of the adapter.

Many servers are capable of producing energy levels that are considered hazardous. Users should not remove enclosures, nor should they bypass the interlocks provided for removal of these hazardous conditions.

Installation of this adapter should be performed by individuals who are both qualified in the servicing of computer equipment, and trained in the hazards associated with products capable of producing hazardous energy levels.

This server adapter is intended for use with UL Listed ITE equipment having instructions on adding and removing components such as PCI and PCI-X devices.

NOTE: Before removing the cover of the server, refer to the HP documentation for the proper methods for installing a PCI card and avoiding electric shock hazards.

Electrostatic Discharge Precautions

A discharge of static electricity from a finger or other conductor can damage components on the adapter, which can make the adapter inoperable. In addition to the following information, refer to Appendix B for more precautions.

To prevent electrostatic damage, observe the following precautions:

•Always properly ground yourself when touching a static-sensitive component or assembly.

•Avoid hand contact by transporting and storing parts in static-safe containers.

•Keep electrostatic-sensitive parts in their containers until they arrive at static-free locations.

•Place containers on a grounded surface before removing the contents.

•Avoid touching pins, leads, or circuitry.

HP NC150T PCI 4-port Gigabit Combo Switch Adapter User Guide 2-1