HP NC510C manual Specifications, CX4 Twin-axial cable, General specifications, Compliance

Specifications

In this section
CX4 Twin-axial cable	10
General specifications	10
Compliance	10
Power and environmental specifications	11
CX4 connector pinout description	11

CX4 Twin-axial cable

The NC510C adapter uses a 10Base-CX4 copper interface to deliver Gigabit Ethernet over four twin- axial copper cable pairs as specified in the IEEE 802.3ak standard. For troubleshooting and other information about cabling, see the CX4 connector pinout description (on page 11).

General specifications

General	Value
specifications
Controller	NETXEN NX2031
Data rate	10 Gbps, full-duplex
PCI bus	8 Lane (x8) PCI Express, compatible with x4 and x8 bus widths
Cable connector	4x InfiniBand® (SFF-8470)
Cable distance	15 meters with CX4 x4 twin-axial cable
Dimensions (LxW)	6.6 x 2.5 in (16.5 x 6.4 cm) without bracket

Compliance

Compliance	Standard
IEEE	802.1p (QoS), 802.1Q (VLANs), 802.3ae (10 Gigabit Ethernet), 802.3ak (CX4),
	802.3x (flow control)
Safety	UL Mark (US and Canada)
	EN 60950
Emissions	FCC Class A, VCCI Class A, BSMI Class A, CISPR 22 Class A, ACA Class A,
	EN55022 Class A, EN55024-1, ICES-003 Class A, MIC Class A

Specifications 10