QuickSpecs

HP LE1901wi 19-inch Widescreen LCD Monitor

Technical Specifications - HP LCD Monitor Quick Release

Mechanical

Dimensions (H x W x D)

Packaged:

7.8 x 6.25 x 1.5 in (19.8 x 15.9 x 3.8 cm)

 

 

Unpackaged:

6.3 x 5.2 x 0.65 in (16 x 13.2 x 1.65 cm)

 

Weight

Packaged:

1.1 lb (0.49 kg)

 

 

Unpackaged:

0.82 lb (0.37 kg)

Additional components

Eight 10 mm mounting screws (for attachment to VESA compliant monitor mounts)

 

Eight 15.5 mm mounting screws (for attachment to HP Compaq t5000 Thin Client products)

 

Four 20 mm mounting screws (for attachment to back of select HP flat panel monitor stands)

 

One Quick Release "locking" screw

ColorCarbonite

NOTE: No HP monitors allow positioning of a thin client product between a monitor screen and its stand.

NOTE: The Quick Release device is not to be used between a monitor screen and its stand unless provided that way from the factory.

NOTE: Under no circumstances is the Quick Release device intended to be used in an orientation where the Release/Lock lever is oriented downward.

Supported weight

The HP LCD Monitor Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg)

capacity

depending upon the mounting configuration used. Please note this is a total weight limit for all devices

 

mounted, i.e. the combined weight of the monitor and a second device such as an HP Thin Client

 

cannot exceed 24 pounds. Because mounting surfaces vary widely and the final mounting method and

 

configuration may vary, mounting fasteners are not supplied (other than the VESA-compliant screws). HP

 

recommends that you consult with a qualified engineering, architectural or construction professional to

 

determine the appropriate type and quantity of mounting fasteners required for your application and to

 

ensure that your mounting solution is properly installed to support applied loads.

 

 

© Copyright 2009 Hewlett-Packard Development Company, L.P.

ENERGY STAR is a US registered mark of the United States Environmental Protection Agency. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

DA - 13355 Worldwide — Version 3 — July 9, 2009

Page 11

Page 11
Image 11
HP NP447A Technical Specifications HP LCD Monitor Quick Release, Mechanical Dimensions H x W x D Packaged, Unpackaged