Manuals / Brands / Computer Equipment / Computer Monitor / HP / Computer Equipment / Computer Monitor

HP p1120 To close the menu, To reset to English, Selecting the Input Signal

1 38

Download 38 pages, 2.21 Mb

HP 21” Color Monitor User’s Guide

Using Your Monitor

4Press the / buttons to select a language.

•ENGLISH

•FRANÇAIS:

•DEUTSCH:

•ESPAÑOL:

•ITALIANO:

•NEDERLANDS:

•SVENSKA:

• :

•:

To close the menu

1Press the button once to return to the main MENU, and twice to return to normal viewing. If no buttons are pressed, the menu closes automatically after about 30 seconds.

To reset to English

2Press the (Reset) button while the LANGUAGE menu is displayed on the screen.

Selecting the Input Signal

You can connect two computers to this monitor using the video input

1 and video input 2 connectors. To select one of the two

computers, use the switch.

1Move the switch to either 1 or 2

2The selected connector appears on the screen for 3 seconds.

3INPUT 1 (video input 1 connector or INPUT 2 (video input 2

connector appears on the screen.

NOTE	If no signal is input to the selected connector, the message NO INPUT
	SIGNAL appears on the screen. After a few seconds, the monitor
	enters power saving mode. If this happens, switch to the other
	connector.

10 English

Contents

Page Notice Important Safety Instructions What Your New Monitor Offers Setting Up Your Monitor Where to Place the Monitor Connecting the Cables How To Install The Drivers Windows 95 or Windows 98 Operating Systems: Using Your Monitor Reset Button Auto Sizing and Centering Button Input Switch Brightness Buttons Contrast Buttons Power Switch and Indicator Using the On-ScreenMenu To display the main MENU To select the menu you want to adjust To adjust the menu To close the menu Resetting the adjustments Selecting the On-ScreenMenu Language To close the menu To reset to English Selecting the Input Signal Automatically sizing and centering the picture Customizing Your Monitor Navigating the menu Exit Size/Center Geometry Screen Color Language Option Displaying the current input signal Adjusting the brightness and contrast Adjusting the size of the picture (SIZE/CENTER) Adjusting the centering of the picture (SIZE/CENTER) Enlarging or reducing the picture (ZOOM) Adjusting the shape of the picture (GEOMETRY) Adjusting the convergence (CONVERGENCE) Adjusting the quality of the picture (SCREEN) Adjusting the color of the picture (COLOR) EASY mode EXPERT mode sRGB mode Restoring the color from the EASY or sRGB menus Additional settings (OPTION) Degaussing the screen Changing the menu position Locking the controls To cancel the control lock Resetting the adjustments Resetting a single adjustment item Resetting all of the adjustment data for the current input signal Factory Preset Modes: Troubleshooting If thin lines appear on your screen (damper wires) On-screenmessages If NO INPUT SIGNAL appears on the screen If OUT OF SCAN RANGE appears on the screen The input signal condition The Remedies No picture and LED is off No picture and LED is on Colors are not pure Picture is not centered Picture is fuzzy Technical Specifications Care and Cleaning Environmental Information Hardware Warranty General Proof of Purchase and Warranty Period Limitation of Warranty Limitation of Liability and Remedies PART II - Year 2000 Warranty 32 English Regulatory Information Notice for the USA: FCC Class B Statement Safety Warning for USA Notice for Canada X-RayRadiation Notice 34 English Notice for Korea Notice for Germany Notice for Japan (Class B) TCO