HP RP7 7800 Base Model manual Securing the RP7 to a Counter Top

8.Replace the rear I/O cover by placing the hooks on the bottom of the cover into the slots on the bottom of the chassis (1). Then rotate the top of the I/O cover up so that it snaps securely onto the chassis (2).

9.Reconnect the power cord and press the power button.

Securing the RP7 to a Counter Top

1.Turn off the computer properly through the operating system, then turn off any external devices.

2.Disconnect the power cord from the power outlet.

CAUTION: Regardless of the power-on state, voltage is always present on the system board as long as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to the internal components of the computer.

3.Pull the power supply cover back then lift if up and off the unit.

56 Chapter 2 Hardware Upgrades ENWW