HP S1922 manual Preparing the monitor for wall-mounting

3.Press the base into the column until it locks in position. Figure 3-2 Attaching the Base

4.Lift the monitor to an upright position and place on a flat, stable surface. Figure 3-3 Monitor in upright position

Preparing the monitor for wall-mounting

1. Check the stability of the wall-mounting fixture.

WARNING! To reduce the risk of personal injury or of damage to the equipment, check that the wall-mounting fixture is adequately installed and secured before attaching the monitor. Refer to the instructions supplied with the wall-mounting fixture and check that it is capable of supporting the monitor.

2.Disconnect the power cable and any other cables from the monitor.

3.Place the monitor face down on a flat, protected surface.

4.Adjust the stand to a proper angle and remove the screw hidden in the column cover that fasten the base to the monitor.

Figure 3-4 Location of screw securing base to monitor

ENWW Installing the Monitor 5