Document Overview
The ColorSpan Legacy 98sx, 72 and 98SI, 72 and 98UVX, and 72SRU printers have both 600x600 dpi (dots per inch) and 600x300 dpi print modes. The printer itself requires no configuration changes to print in either mode. All settings are made on the Onyx RIP product (RIP Queue, Postershop, or Production House). There are two specific requirements:
1.A media profile created for 600x300 dpi
2.600x300 selected in Preflight
The remainder of this document describes in greater detail how to prepare or configure an Onyx 6.5 or newer prod- uct to meet these requirements.
Selecting a Media Profile With 600x300 Resolution Support
Open the Media Manager and locate the desired media profile for the material you will be printing on. In the left- hand “Settings” column you will see a number of entries for the dot patterns and resolutions that are available in that profile. The example below for “MDO White” shows both 600x600 and 600x300 support:
If the media profile does not have any 600x300 color information, the column on the right will say “No Profiles” and
will be empty, as shown below:
2
