HP Serviceguard Continentalcluster manual 483

Table 34 AUTO_NONCURDATA

Local State	Remote State	Fence Level	AUTO_NONCURDATA	AUTO_NONCURDATA =1 or
			=0 (Default)	FORCEFLAG=yes
PVOL_PSUS	EX_ENORMT	NEVER/DATA/ASYNC	Do not start with	Starts with a warning message
PVOL_PSUS	EX_CMDIOE		exit 1	about non-current data in the
				package’s control log file.
PVOL_PFUS	EX_ENORMT	ASYNC
PVOL_PFUS	EX_CMDIOE
SVOL_PAIRSVOL_PAIR	PVOL_PSUE	NEVER/DATA/ASYNC	Do not start with	Perform SVOL takeover, which
SVOL_ PAIR	EX_ENORMT		exit 1	changes SVOL to PSUS
	EX_CMDIOE			(SSWS). After the takeover
				succeeds, package starts with
SVOL_PFULSVOL_PFUL	PVOL_PSUE	ASYNC
				a warning message about
SVOL_PFUL	EX_ENORMT			non-current data in the
	EX_CMDIOE			package’s control log file
SVOL-PAIR;MINAP=0	PVOL-PAIR;	(Continuous	Do not start with	Perform SVOL takeover, which
	MINAP>0,	Access-Journal)	exit 1	changes SVOL to
	MINAP=0			PSUS(SSWS). After the

EX_ENORMTEX_CMDIOE	takeover succeeds, package
	starts with a warning message
	about non-current data in the
	package's log file

Table 35 AUTO_PSUEPSUS

Local State	Remote State	Fence Level	AUTO_PSUEPSUS =0 (Default)	AUTO_PSUEPSUS =1 or
				FORCEFLAG=yes
PVOL_PSUE	SVOL_PSUS	ASYNC	Do not start with exit 1	Pairresync-swapp works,
				package starts up.
PVOL_PFUS	SVOL_PSUS
				* If pairresync-swapp works,
				package starts up.
				*If pairresync-swapp fails,
				package does not start with exit
				1.

Table 36 AUTO_PSUSSSSWS

Local State	Remote State	Fence Level	AUTO_PSUSSSSWS =0	AUTO_PSUSSSSWS =1 or
			(Default)	FORCEFLAG=yes
PVOL_PSUS	SVOL_PSUS(SSWS)	NEVER/DATA/ASYNC	Do not start with exit 1	Pairresync-swapp works,
				package starts up.

* If pairresync-swapp works, package starts up.

*If pairresync-swapp fails, package does not start with exit 1.

Table 37 AUTO_SVOLPFUS

Local State	Remote State	Fence Level	AUTO_SVOLPFUS =0 (Default)	AUTO_SVOLPFUS =1 or
				FORCEFLAG=yes
SVOL_PFUS	PVOL_PFUS	ASYNC	Do not start on the local node	Perform SVOL takeover, which
SVOL_PFUS	EX_ENORMT		with exit 2.	changes SVOL to
				PSUS(SSWS). After the
SVOL_PFUS	EX_CMDIOE
				takeover succeeds, package
				starts with a warning message
				about non-current data in the
				package’s control log file

483