●PC screen only: View the screen image on the tablet only.

●Duplicate: View the screen image simultaneously on both the tablet and the external device.

●Extend: View the screen image extended across the tablet and the external device.

●Second screen only: View the screen image on the external device only.

Each time you press f4, the display state changes.

NOTE: For best results, especially if you choose the "Extend" option, increase the screen

resolution of the external device, as follows. From the Start screen, tap

, type control

panel, and then select Control Panel. Select Appearance and Personalization. Under Display, select Adjust screen resolution.

Setting up HDMI audio

HDMI is the only video interface that supports high-definition video and audio. After you connect an HDMI TV to the tablet, you can then turn on HDMI audio by following these steps:

1.From the Windows desktop, tap and hold the Speakers icon in the notification area, at the far right of the taskbar, and then select Playback devices.

2.On the Playback tab, select the name of the digital output device.

3.Tap Set Default, and then tap OK.

To return the audio stream to the tablet speakers:

1.From the Windows desktop, tap and hold the Speakers icon in the notification area, at the far right of the taskbar, and then tap Playback devices.

2.On the Playback tab, tap Speakers.

3.Tap Set Default, and then tap OK.

Connecting digital display devices using a DisplayPort cable (select models only)

NOTE: To connect a digital display device to your tablet, you need a DisplayPort (DP-DP) cable, purchased separately.

The DisplayPort connects a digital display device such as a high-performance monitor or projector. The DisplayPort delivers higher performance than the VGA external monitor port and improves digital connectivity.

1.Connect one end of the DisplayPort cable to the DisplayPort on the tablet.

Using video

7