HP T200 manual 4

MV100 ELECTRIC CONTROLLERS T100, T200 THERMOSTATIC CONTROLLERS AND V2000 RADIATOR VALVES

Table 1. T100,T200 Models.

Model	Control Range	Mounting	Capillary	Description
T100A	43°F to 79°F	Directa	None	Components are in one unit.
	(6°C to 26°C)
T100B	48°F to 79°F	Remote	One 6-1/2 ft (2 m)	Sensor and setpoint dial combined and remote from valve
	(9°C to 26°C)		or 16 ft (5 m)	actuator.
T100C		Remote	Two 4-1/2 ft	Components mount remotely from each other.
			(1.4 m)
T100F	43°F to 79°F	Direct with	One 6-1/2 ft (2 m)	Sensor is remote from combination setpoint dial and valve
	(6°C to 26°C)	remote		actuator.
		sensor.
T100M		Directa	None	Components are in one tamper-resistant unit.
T200A		Directa	None	White body with chrome-plated end.

aMount the unit horizontally on the valve body for accurate temperature regulation.

Table 2. V2000 Models.

			Connection
Model		Body Pattern	Inlet	Outlet		Application
V2040D		Straight	NPT	Union Nut with	Use where manual valves were not originally installed.
			Threaded	NPT Threaded
V2040E		Angle			Typically used with remote temperature sensing controllers.
				or Sweat
V2040A		Horizontal Angle			Typically used with direct-mount controllers (T100A,M; T200A)
V200LD		Straight	Sweat	Sweat	Use with copper tubing installations.
V2042H/		One-Pipe	18 in. NPT	1/8 in NPT for	Use in single-pipe steam applications.
V2043H				SA123A Vent
	V2040D (Straight Body)				V2040E (Angle Body)

B MAX.

B MAX.

A	C
	M12930B

V2040A (Horizontal Angle Body)

M12931B

C

A

V200LD (Straight Body)

B MAX.

B MAX. A

M12932B

M12933B A

Fig. 2. V2000 dimensions.

NOTE: Refer to Table 3 for detailed valve dimensions for each valve size.

62-3048—2 4