HP Thin Client t5300 Type, Next, Enter, Reset, Modem, 5291_1, 5292_2, 3179_2, 3180_2, TCP/IP, Serial, Display, 5251_11, 3196_A1, 3477_FC, 3477_FG, 3486_BA, 3487_HA, 3487_HC

IBM 5250 Emulation

as monochrome (green for normal characters, white for intense attribute) or colour for attributes. The terminal models currently supported and their display characteristics are listed below.

Type	Display	Rows x Columns
5291_1	Monochrome	24 x 80
5292_2	Colour	24 x 80
5251_11	Monochrome	24 x 80
3179_2	Colour	24 x 80 (default)
3196_A1	Monochrome	24 x 80
3180_2	Monochrome	24 x 80 and 27 x 132
3477_FC	Colour	24 x 80 and 27 x 132
3477_FG	Monochrome	24 x 80 and 27 x 132
3486_BA	Monochrome	24 x 80
3487_HA	Monochrome	24 x 80
3487_HC	Colour	24 x 80
5555_B01	Monochrome	24 x 80
5555_C01	Colour	24 x 80

The printer models supported are listed below:

3812-1	Single byte printer
5553-B01	Double byte printer

If double byte character sets (e.g. Japanese) are supported and you wish to use them, then select either 5555_B01 (monochrome) or 5555_C01 (colour) for display, or 5553-B01for printing.

6.Specify if you want the right or left Control keys to perform the same function as the keypad Enter or Reset keys, respectively.

7.Specify the IBM5250 Monochrome setting. Note that all IBM 5250 models support both monochrome and colour display. When monochrome is selected, characters will be displayed in green and intense fields will be displayed in white. When monochrome is not selected, the settings specified in the Attributes dialog box (described in the Setup Menus chapter) will be used for the display.

8.Click Next to display the Host Information dialog box.

For a TCP/IP connection, click the TCP/IP button, enter the name or internet address of the host computer in the Host Name box, then click Advanced for additional Telnet options. Refer to the TCP/IP Connection Settings section in chapter 2 for details.

For a modem connection, click the Modem button then click Advanced to display configuration options. Refer to the Modem Connection Settings section in chapter 2 for details.

For a serial connection, click the Serial button, specify the communications port in the Connect To box, then click Advanced for additional serial options. Refer to the Serial Connection Settings section in chapter 2 for details.

10-2