Hardware Upgrades
3.Remove the chassis cover by removing the two screws 1 and pulling the chassis cover 2 off.
4.Disconnect the speaker cable 3 from the system board.
Removing the Chassis Cover and Disconnecting the Speaker
To replace the cover, reverse the previous steps.
Installing Thin Client Options
There are several options available for installation on the thin client such as flash memory, SODIMMs, and security hardware (see Appendix B, “Security Provisions” for security hardware information). Not all thin clients support the same options. Visit the HP website at http://h18004.www1.hp.com/products/thinclients/ options/index.html to see what options are supported and to order available options.
The following sections contain general installation instructions for some of the available options. In all cases, see the specific installation instructions that came with the thin client option.
Before beginning the installation process, review the “General Hardware Installation Sequence” section earlier in this chapter, for instructions on what to do before and after installing any options.
www.hp.com | Hardware Reference Guide |