Monitoring and Logging
Packet LogThe Packet Log captures every packet of data that enters or leaves a port on your device. The Packet Log is disabled by default in the Agent because of its potentially large size. You must enable the Packet Log first.
Icons for the Packet Log
There is only one icon displayed in the Packet Log. It indicates the capturing of raw data packets.
Table 9. Packet Log Icons
Icon Description
Full data packet captured
Packet Log Parameters and Description
The columns for logged events are:
Table 10. Packet Log Parameters and Description
Name of Parameter | Description |
Time | The exact date and time that the packet was logged |
|
|
Remote Host | Name of the remote computer (only appears in Local View - this is the |
| default) |
|
|
Remote Port | Port on the remote host that sent/received the traffic (only appears in |
| Local View - this is the default) |
|
|
Local Host | IP Address of the local computer (only appears in Local View - this is |
| the default) |
|
|
Local Port | Port used on the Agent device for this packet (only appears in Local |
| View - this is the default) |
|
|
Source Host | Name of the source computer (only appears in Source View) |
|
|
Source Port | Port on the source host that sent/received the traffic (only appears in |
| Source View) |
|
|
Destination Host | IP Address of the destination computer (only appears in Source View) |
|
|
Destination Port | Port used on the destination computer for this packet (only appears in |
| Source View) |
|
|
Direction | Direction that the traffic was traveling in (incoming or outgoing) |
|
|
Action | Action taken by the Agent: Blocked or Allowed |
|
|
Application Name | Name of the application associated with the packet |
|
|
33