HP Traffic Director Server Appliances Getting Started Guide
Side Rail
Installation
NOTE: The small mounting brackets have recesses that allow them to fit over the front end of the side rail.
Side rail mounting of the SA8220 requires the use of the enclosed small mounting brackets and four of the Phillips head screws.
1.Locate the two small mounting brackets and the provided screws.
2.Attach a side rail to each SA8220 using the rows of five screw holes on the side of the SA8220, equidistant from the top and bottom, as shown below. The screws for this procedure are not provided with the SA8220; they are supplied with your side rail hardware.
SA8220 bracket | Mounting bracket | Rail mount holes | ||||||||
holes | ||||||||||
(connect to SA8220) |
|
| ||||||||
|
| |||||||||
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
Side Rail Mounting of the SA8220
3.Attach a small mounting bracket to each side of the SA8220, using two of the provided screws for each bracket. Use the holes nearest to the front of the SA8220.
4.Slide the SA8220 into the cabinet’s receiving rails and secure the front flange of each mounting bracket with two screws.
4