•Four resolution settings are available:
Resolution
Full HD (1920 x 1080,30fps)
HD (1280 x 720,60fps)
WVGA (848 x 480, 30fps)
•Press Record/OK button ( 
) to record videos. When a video is recording, an video recorded time
indicator will display on LCD monitor. To stop recording, press Record/OK button ( 
) again.
•Press the Mode button ( 
) to switch to Playback mode to view the recorded video.
•If the motion detection feature is enabled, the camcorder will begin to record video automatically once movement/motion is detected in the field of view. When movement/motion is no longer detected, the camcorder will stop recording a few seconds later. Follow the steps below to enable this feature.
1.In Video mode, press the menu button ( 
) to display the Settings menu. Use the Tele/Wide
buttons (
/
) to navigate to the [Motion Detection] option.
2. Press the Record/OK button ( ) to enter the submenu and use the Tele/Wide buttons
(
/
) to highlight [On].
3.When this feature enabled, the Motion Detection icon ( 
) will appear in the upper right corner of the LCD.
15
EN