Optionally, you can install Data Protector from a depot on the disk:

To copy the DP_DEPOT, AUTOPASS, and LOCAL_INSTALL directories, where the installation files are stored, to your local disk, run:

#mkdir <directory>

#cp -r /dvdrom/<platform_dir>/DP_DEPOT <directory>

#cp -r /dvdrom/<platform_dir>/AUTOPASS <directory>

#cp -r /dvdrom/<platform_dir>/LOCAL_INSTALL <directory>

Where <platform_dir> is:

hpux_ia for HP-UX 11.23 on IA-64 systems

hpux_pa for HP-UX on PA-RISC systems

linux_x86_64 for Linux systems on AMD64/Intel EM64T

solaris for Solaris systems

To copy the whole DVD-ROM to your local disk, run:

#cp -r /dvdrom <dvd_image_dir>

2.Run the omnisetup.sh command. To run this command from the DVD-ROM, type:

#cd /dvdrom/LOCAL_INSTALL

#./omnisetup.sh –CM

To start the installation from disk:

If you have copied the DP_DEPOT, AUTOPASS, and LOCAL_INSTALL directories to your local disk in the directory <directory>, run:

#cd <directory>/LOCAL_INSTALL

#./omnisetup.sh -source <directory> -CM

If you have copied the whole DVD-ROM to <dvd_image_dir>, run the omnisetup.sh command with the -CM parameter:

#cd <dvd_image_dir>/LOCAL_INSTALL

#./omnisetup.sh -CM

3.On HP-UX and Solaris, omnisetup.sh prompts you to install or upgrade the HP OpenView AutoPass utility if you want to download and install passwords for the purchased licenses directly through the internet from the HP password delivery center web server. HP recommends installation of AutoPass. If AutoPass is installed on a Veritas cluster, it must be installed on all nodes. When prompted, press Return to install or upgrade AutoPass. If you do not need to install or upgrade AutoPass, press n.

On Linux, HP OpenView AutoPass is not installed.

If you have installed or upgraded the Cell Manager on Solaris 9 or Solaris 10, remotely install the Disk Agent on the Cell Manager after the installation or upgrade is complete, using an Installation Server. This replaces the generic Solaris Disk Agent with the Solaris 9 or Solaris 10 Disk Agent.

If you need to install an Installation Server for UNIX on your Cell Manager, perform this task at this point.

When the installation completes, the core Data Protector software is located in the /opt/omni/bin directory and the Installation Server for UNIX in the /opt/omni/databases/vendor directory. The following list shows the Data Protector subdirectories and their contents:

IMPORTANT

To install Data Protector to linked directories, for instance: