3

HP vc4815 Series Setup

(F10) Utility

Using HP v c 4 8 1 5 Series Setup (F10) Utility

The Setup utility can be accessed only by turning the computer on or restarting the system. To access the Setup Utility menu, complete the following steps:

1.Turn on or restart the computer.

2.When the F10 <BIOS Setup> message displays in the task bar at the bottom of the screen, press the F 1 0 key.

If you do not press the F 1 0 key while the message is displayed, you must restart the computer again to access the utility. When the F10 Post Screen display is set to zero seconds, it may be necessary to press and hold F 1 0 on the keyboard, then power on the computer.

3.A choice of five menu headings and five task headings appears in the Setup Utility menu:

Menu Headings: System Information, Standard CMOS Features, Advanced BIOS Features, Integrated Peripherals, and Power Management Setup.

Task Headings: Load Defaults Setting, Set Supervisor Password, Set User Password, Save Setting and Exit, and Exit without Saving.

Service Reference Guide

www.hp. com

3-1