Adjusting the “Clock/Phase” Submenu

To adjust the “Clock/Phase” submenu you should follow the steps below:

1Bring-up the OSD “Main Menu”.

2Use the ‘+’ or ‘—’ button to move (forward or backward) to the clock/phase icon and highlight it.

3If ‘Clock’ is selected, you may use the ‘+’ or ‘—’ buttons to adjust the setting of clock. The fullness of the graphic bar as well as the numerical value at the right corner is changed accordingly.

If ‘Phase’ is selected, you may use the ‘+’ or ‘—’ buttons to adjust the setting of phase. The fullness of the graphic bar as well as the numerical value at the right corner is changed accordingly.

NOTE: We recommend you perform the Auto Adjust before adjusting the phase.

If ‘Exit’ is selected, it will exit the “Clock/Phase” submenu and go back to the “Main Menu”.

NOTE: We recommend you perform the Auto Setup first. And adjust the clock setting only if the image looks incorrect.

Adjusting the “Color” Submenu

To do adjustment in the “Color” submenu you should follow the steps below:

1Bring-up the OSD “Main Menu”.

2Use the ‘+’ or ‘—’ button to move (forward or backward) to the Color icon and highlight it.

12user’s guide