EPA Energy Star Compliance

Monitors that are marked with the Energy Star® Logo meet the requirements of the EPA Energy Star program. As an Energy Star Partner, Hewlett-Packard Company has determined that this product meets the Energy Star guidelines for energy efficiency. Specific details on using the Energy Saving features can be found in the energy saver or power management section of the computer manual.

Power Cord Set Requirements

The monitor power supply is provided with Automatic Line Switching (ALS). This feature allows the monitor to operate on input voltages between 100–120V￿ or 200–240V￿.

The power cord set (flexible cord or wall plug) received with the monitor meets the requirements for use in the country where you purchased the equipment.

If you need to obtain a power cord for a different country, you should purchase a power cord that is approved for use in that country.

The power cord must be rated for the product and for the voltage and current marked on the product’s electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. In addition, the cross-sectional area of the wire must be a minimum of

0.75mm² or 18AWG, and the length of the cord must be between 6 feet (1.8 m) and 12 feet (3.6 m). If you have questions about the type of power cord to use, contact your HP authorized service provider.

A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it

or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product.

English

User’s Guide 15

Filename: mb416033.doc

Title: User's Guide - CRT Color Monitor Series FS7600, vx74 [English]

Template: Print_2004.dot

Author: WASSER Studios

Last Saved By: Kim Toy

Revision #: 22

Page: 15 of 20

Printed: 06/03/04 10:15 AM