Back to Contents Page

Wall Mounting Arm

Preparing to Install a Wall Mounting Arm (Not supplied) • Installing a Wall Mounting Arm

Preparing to Install a Wall Mounting Arm (Not supplied)

This monitor can be attached to a wall mounting arm that you purchase separately.

CAUTION: Before disassembling the monitor, turn off the monitor power, and disconnect all power, video, and audio cables.

1Disconnect the cables from the monitor.

2With the panel face-down on a protected surface, remove the screws and the pedestal attachment.

3Follow the manufacturer’s instructions to assemble the wall mounting arm.

See Installing a Wall Mounting Arm for further installation instructions.

Installing a Wall Mounting Arm

1Set the monitor screen down on a flat, soft, protected surface.

2Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the mounting holes in the back of the monitor.

3Insert four screws into the mounting holes and tighten.

4Reconnect the cables. Refer to the user’s manual that came with the wall mounting arm (purchased separately) for instructions on attaching it to the wall.