Where are the drivers? ♦ Windows NT 4.0 and Windows 2000 drivers are provided on the Fire GL CD.

♦Linux drivers are available for downloading from www.ati.com/support.

Are you installing your Fire GL2 in place of a card from another manufacturer?

Before you shut down your computer and remove the installed graphics solution , we recommend that you un-install the old card first:

♦Use the uninstall program for your existing card, if one is available. Consult the documentation for your old card if necessary.

♦If no uninstall program is available, install the standard VGA driver via the Display Properties applet. For more information refer to Setting the Display Driver to Standard VGA.

Do you have an

Please refer to the manual or contact your

integrated graphics

motherboard manufacturer to determine

solution on the

how to disable your on-board graphics.

motherboard?

 

 

 

Plug-n-Play?

The card has been designed to take

 

advantage of 'plug–n-play' without requiring

 

additional hardware installation or

 

configuration.

The illustrations do not The illustrations provided in this section are

show your card? for instructional use only; the card shown may look different than the one you purchased.

10 Installing the Fire GL2