Ceiling Mount User’s Guide
uDrill four holes into the structural ceiling member.
Attach the ceiling rod to the ceiling with the four cylinder screws.
Structural Ceiling
Cylinder Screw
Be sure to install the projector into a solid, structural ceiling member:
4Ceiling Mounting Procedure: Before installation, refer to the
“Adjusting the Projected Image” section of the Projector User’s Guide for the projection distance based upon the de- sired image size. Use this projection distance to locate the ceiling mount.
HP recommends that a competent carpenter or electrician install this ceiling mount.
vMount the projector to the ceiling mount bracket with the three bracket screws.
Three Bracket Screws
Ceiling Rod 
w
Attach the ceiling bracket to the ceiling rod with the round thumbscrew. Height adjustments can be made by using different holes on the ceiling rod and ceiling bracket.
vThe total adjustment range is15.75 to
25.6inches (40~65cm). Adjusments can be made in one inch (2.5cm) increments.
xMake necessary roll and yaw adjustments to the
projector.
(YAW ADJUSTMENT) | (ROLL ADJUSTMENT) | ||||
|
|
|
|
|
|
|
|
|
|
|
|
Round Thumbscrew
Ceiling Bracket
180°
±60° | ±20° |
|
vAdjust the appropriate ceiling projection image mode from the “Management” menu tab in the on screen display.
P/N