HP xb31 “Computer Image” Menu, Tracking, Press the, Frequency, Auto Image, Reset this menu, Horizontal Position, To open the “Computer Image” menu:

user

controls

xb31 sb21

NOTE: This message is displayed when an image source other than computer VGA is selected via the Source button or the auto detection function.

The “Computer Image” parameters cannot be adjusted when this message is displayed.

“Computer Image” Menu

To open the “Computer Image” menu:

1.Press the “Menu” button to open the On Screen Display (OSD) menus.

2.Use the or buttons to open the “Computer Image” menu tab.

3.Press the buttons to select one of the following items:

Auto Image

The projector automatically adjusts frequency, tracking, horizontal and vertical position. With most signal sources, Auto Image provides the best results.

Frequency

“Frequency” is the display data frequency. This should match the frequency of your computer’s graphic card. When you experience a vertical flickering bar, use this function to make adjustments.

Tracking

Choose “Tracking” to synchronize the signal timing of the display with that of the graphic card. When you experience an unstable or flickering image, use this function to correct it.

Horizontal Position•Press the button to move the image left.•Press the button to move the image right. Vertical Position•Press the button to move the image up.•Press the button to move the image down.Reset this menu

Choose “Yes” to return the display parameters of this menu to their factory default settings.

NOTE: The hp sb21’s OSD does not include an Audio menu.

25