POST Error Messages Continued |
|
|
|
|
Screen Message | Beeps* | Probable Cause | Recommended Action | |
2S | Device IRQ address conflicts | Reset the IRQ. | ||
Conflict Detected |
| with another device. |
|
|
| Device IRQ address conflicts | Reset the IRQ. | ||
Conflict Detected |
| with another device. |
|
|
1611- Fan failure detected | None | Chassis fan not conneted to | 1. | Reconnect the fan. |
|
| the system board. | 2. | Replace the fan. |
|
|
| ||
|
|
| 3. Replace the system board. | |
None | Hard drive is about to fail. | 1. | Determine if hard drive is | |
Detects Imminent Failure |
| (Some hard drives have a |
| giving correct error message. |
|
| firmware patch that will fix |
| Run the Drive Protection |
|
| an erroneous error |
| System test available. |
|
| message.) | 2. Apply firmware patch if | |
|
|
| ||
|
|
|
| applicable. |
|
|
| 3. Back up contents and replace | |
|
|
|
| hard drive. |
None | Hard drive is about to fail. | 1. | Determine if hard drive is | |
Drive Detects Imminent |
| (Some hard drives have a |
| giving correct error message. |
Failure |
| firmware patch that will fix |
| Run the Drive Protection |
|
| an erroneous error |
| System test available. |
|
| message.) | 2. Apply firmware patch if | |
|
|
| ||
|
|
|
| applicable. |
|
|
| 3. Back up contents and replace | |
|
|
|
| hard drive. |
2S | Internal and external hard | 1. | Remove any Comm port | |
Address Assignment |
| drive controllers are both |
| expansion cards. |
Conflict |
| assigned to the primary | 2. | Clear CMOS. |
|
| address. | ||
|
| 3. | Reconfigure card resources | |
|
|
| ||
|
|
|
| and/or run Computer Setup |
|
|
|
| (F10 Setup). |
2S | Internal and external hard | 1. | Remove any Comm port | |
Address Assignment |
| drive controllers are both |
| expansion cards. |
Conflict |
| assigned to the primary | 2. | Clear CMOS. |
|
| address. | ||
|
| 3. | Reconfigure card resources | |
|
|
|
and/or run Computer Setup (F10 Setup).
* L = Long, S = Short
continued