HP xp7010/xp7030 manual 51

Video functions (continued)

Command	Parameters	Description
TNT	–45 to 45, +, –, ? Sets or queries the tint.
RADJ	–50 to 50, +, –, ? Sets or queries the amount of red.
GADJ	–50 to 50, +, –, ? Sets or queries the amount of green.
BADJ	–50 to 50, +, –, ? Sets or queries the amount of blue.
CTMP	0 to 2, ?	Sets or queries the color temperature: 0=warm, 1=neutral,
		2=cool.
SHRP	0 to 12, +, –, ?	Sets or queries the sharpness.
PENH	0 to 6, +, –, ?	Sets or queries the picture enhancement setting.
KEYV	–50 to 50, +, –, ? Sets or queries the vertical keystone: 0=no keystone
		adjustment, 1 to 50=shrinks the top of the display,
		–1 to -50=shrinks the bottom of the display.
ASPT	0, 1, 4, ?	Sets or queries the aspect ratio: 0=1-to-1, 1=Best Fit,
		4=Reduced.
SYNC	None	Automatically resynchronizes the projector to the active
		computer input source.
FREQ	–50 to 50, +, –, ? Sets or queries the projector’s timing relative to the active
		computer input source.

TRK value, +, –, ?

Sets or queries the synchronization of the projector to the active computer input source.

VPOS value, +, –, ?

Sets or queries the vertical positioning of the projected image: usable range is the maximum and minimum allowed by the active computer input source.

HPOS value, +, –, ?

Sets or queries the horizontal positioning of the projected image: usable range is the maximum and minimum allowed by the active computer input source.

HIDE	0, 1, ?	Sets or queries picture blanking: 0=not hidden, 1=hidden.
WIDE	0, 1, ?	Sets or queries wide screen mode: 0=normal, 1=wide.
KEYR	None	Resets keystone to zero.

Connecting to a room controller 51