Remote control problems

If the remote control does not operate:

•Be sure nothing is blocking the remote control receiver on the front or back of the projector. Move to within 8 m (26 ft) of the projector.

•Aim the remote control at the screen or at the front or back of the projector.

•Move the remote control so it is more directly in front of or behind the projector and not as far to the side.

•Press enter, go to Help > Diagnostics, and run the remote control test.

•Replace the battery in the remote control.

Testing the projector

Running the projector diagnostics

The on-screen menu contains diagnostic tests you can use to verify the proper operation of the projector and the remote control.

1.Press enter and go to Help > Diagnostics.

2.Select a test and press enter.

3.Follow the displayed instructions.

60 Fixing Problems