Connecting the Cables

1.Place the monitor in a convenient, well-ventilated location near the computer.

2.Before connecting the cables, route the cables through the cable routing hole in the center of the stand.

3.Depending on your model and configuration, connect either the DisplayPort, DVI, HDMI, or VGA video cable between the PC and the monitor.

NOTE: The monitor is capable of supporting either analog or digital input. The video mode is determined by the video cable used. The monitor will automatically determine which inputs have valid video signals. The inputs can be selected by pressing the Input button on the front panel or through the On-Screen Display (OSD) feature by pressing the Menu button.

●For analog operation, connect the VGA signal cable to the VGA connector on the rear of the monitor and the other end to the VGA connector on the computer (cable provided with select models).

6

Chapter 2 Setting Up and Using the Monitor