Adjusting the Monitor Settings

The monitor settings can be adjusted from the On-Screen Display (OSD) menu or from the HP Display Assistant utility.

NOTE: If there is a problem with the display settings, try resetting the settings to the factory defaults by opening the OSD and selecting Factory Reset from the OSD menu.

Using the On-Screen Display Menu

Use the On-Screen Display (OSD) to adjust the screen image based on your viewing preferences. To access the OSD, do the following:

1.If the monitor is not already on, press the Power button to turn on the monitor.

2.To access the OSD Menu, press the Menu button on the monitor’s front panel.

3.To navigate through the OSD Menu, press the + (Plus) button on the monitor’s front panel to scroll up, or the – (Minus) button to scroll down.

4.To select an item from the OSD Menu, use the + or – buttons to scroll to and highlight your selection, then press the OK button to select that function.

5.Adjust the item using the + or – buttons on the front panel to adjust the scale.

6.After adjusting the function, select Save and Return, or Cancel if you don’t want to save the setting, then select Exit from the Main Menu.

NOTE: If the buttons remain untouched for 30 seconds (factory default) while displaying a menu, the firmware will save the current adjustments and exit. Also, if the video controller changes video mode while the OSD is active, the current (adjusted) settings will not be saved, the OSD will be turned off, and the new mode will be displayed.

20 Chapter 4 Operating the Monitor

ENWW