Table
Icon | Main Menu | Submenu | Description | |
|
|
|
| |
| Information |
| Selects and displays important information about the | |
|
|
| monitor. | |
|
|
|
| |
|
| Current Settings | Provides the current input video mode. | |
|
|
|
| |
|
| Recommended | Provides the recommended resolution mode and | |
|
| Settings | refresh rate for the monitor. | |
|
|
|
| |
|
| Serial Number | Reports the serial number of the monitor. The serial | |
|
|
| number is needed if contacting HP technical support. | |
|
|
|
| |
|
| FW Version | Reports the firmware version of the monitor. | |
|
|
|
| |
|
| Backlight Hours | Reports the total hours of backlight operation. | |
|
|
|
| |
|
| Service Support | ||
|
|
|
| |
| Factory Reset |
| Returns all OSD menu settings and DDC/CI controls | |
|
|
| to the factory default settings, except the Language. | |
|
|
|
| |
| Source Control |
| Selects the video input signal. DisplayPort is the | |
|
|
| factory default. | |
|
|
|
| |
|
| DisplayPort | Selects DisplayPort as the video input signal. | |
|
|
|
| |
|
| DVI | Selects DVI as the video input signal. | |
|
|
|
| |
|
| VGA | Selects VGA as the video input signal. | |
|
|
|
| |
|
| Default Source | Selects the default or primary video input signal when | |
|
|
| the monitor is connected to two active and valid video | |
|
|
| sources. The monitor will automatically determine the | |
|
|
| video format. The choices are: | |
|
|
| ● | DisplayPort |
|
|
| ● | DVI |
|
|
| ● | VGA |
|
|
| The factory default is DisplayPort. | |
|
|
|
| |
|
| Turns the system's automatic video signal input to On | ||
|
|
| or Off. The factory default is On. | |
|
|
|
| |
|
| Source Detection | This option is displayed in the OSD when a DisplayPort | |
|
|
| input is selected. You can set Source Detection to: | |
|
|
| ● | Always Active |
|
|
| ● | Low Power |
|
|
| The factory default is Low Power. | |
|
|
|
| |
| Exit |
| Exits the OSD menu screen. | |
|
|
|
|
|
24 Chapter 4 Operating the Monitor | ENWW |