HTC X+ Connecting to a Wi-Fi network via WPS, Disconnecting from the current wireless network

159Internet connections

3.Tap Wi-Fi.

Detected Wi-Fi networks will be listed.

If the wireless network that you want is not listed, tap > Add network to manually add it.

4.Tap the Wi-Fi network you want to connect to. If you selected a secured network, you'll be asked to enter the network key or password.

5.Tap Connect. You'll see the Wi-Fi icon in the status bar when connected.

The next time HTC One X+ connects to a previously accessed secured wireless network, you won’t be asked to enter the key or other security information again.

Connecting to a Wi-Fi network via WPS

If you're using a Wi-Fi router with Wi-Fi Protected Setup (WPS), you can connect HTC One X+ easily.

1.Slide the Notifications panel open, and then tap .

2.Tap the Wi-Fi On/Off switch to turn Wi-Fi on.

3.Tap Wi-Fi.

4.Tap > WPS Push, and then press the WPS button on your Wi-Fi router.

To use the Wi-Fi Protected Setup (WPS) PIN method, tap > WPS Pin Entry.

Disconnecting from the current wireless network

1.Slide the Notifications panel open, and then tap .

2.Tap Wi-Fi.

3.You can:

§Tap the wireless network that HTC One X+ is connected to, and then tap Disconnect.

§If you want to remove the settings for this network, press and hold the network name, and then tap Forget network.

Connecting to a different Wi-Fi network

1.Slide the Notifications panel open, and then tap .

2.Tap Wi-Fi. Detected Wi-Fi networks are displayed.

To manually scan for available Wi-Fi networks, tap > Scan.

3.Tap a Wi-Fi network to connect to it.