![](/images/new-backgrounds/1041932/4193233x1.webp)
HUAWEI EM820W HSPA+ PC Embedded Module |
|
Hardware Guide | Description of the Application Interfaces |
The
Templates of the USB2.0 signal specification.
3.6 USIM Signals
The USIM is a smart card for UMTS/GSM cellular applications. The USIM provides the required subscription information to allow mobile equipment to attach to a GSM or UMTS network. The USIM also provides the subscriber's verification procedures as well as authentication methods for network authentication during the process of attaching to a network.
Table
Pin | Name | Description |
|
|
|
8 | UIM_PWR | Power source for the external |
|
| UIM/SIM. |
|
|
|
10 | UIM_DATA | External UIM/SIM data signal. |
|
|
|
12 | UIM_CLK | External UIM/SIM clock signal. |
|
|
|
14 | UIM_RESET | External UIM/SIM reset signal. |
|
|
|
Direction to Module
Output
Input/output
Output
Output
It is recommended that the SIM card is inserted only after the power supply of the module is disconnected; otherwise the SIM card may get destroyed.
3.6.1 USIM Interface Schematic Reference
There is no SIM card interface circuit in the EM820W module, and users need to add the USIM interface circuit. Figure
Issue 01 | Huawei Proprietary and Confidential | 10 | |
Copyright © Huawei Technologies Co., Ltd. | |||
|
|