Huawei HG232f - page 45

5 Configuring Frequently Used Functions
HG232f 300Mbps Wireless Router
User Guide
5-18
 The IP address of the web server is 192.168.3.166.
You can use the port relay function of the NAT and DDNS function to implement the
preceding requirements.
Before the configuration, you need to complete the following actions:
 Apply for the DDNS from a DDNS provider to obtain relevant parameters.
 Apply for a domain name for the web site from the institution that manages web site
domain names.
After the preceding actions, set the parameters of the router as follows:
 Configure a port mapping rule, and then map the IP address of the web server
(192.168.3.166:80) to the 80 port of the WAN interface.
 Configure the DDNS. Ensure that the router can submit IP addresses to the DDNS
server automatically.
The configuration procedure is as follows:
Step 1 Log in to the web-based configuration utility.
Step 2 In the navigation tree, choose Advanced > NAT.
The NAT page is then displayed.
Step 3 Click Port Mapping.
Step 4 Click New.
Step 5 Select Application, and then select Security web server (HTTPS) for Application.
The port mapping function of the router provides parameter setting templates of multiple
applications. After a template is selected, the router sets relevant parameters automatically. You
can change the parameter settings as required. You can also set all the parameters manually based
on the requirements of other applications.
Step 6 Set the following parameters as planned.
 External start port: 80
 External end port: 80
 Internal host: 192.168.3.166
 Internal port: 80
Step 7 Click Submit.