Huawei HG532 3 Setting the Network-Access Parameters

3 Setting the Network-Access Parameters

The HG532 supports ADSL2+ uplink and High-Speed Packet Access (HSPA) uplink

through Huawei HSPA data card. Realizes dynamic mutual backup of voice and data

services through the DSL link and HSPA link.

When the HG532 is working through Huawei HSPA data card, you need to install the

Huawei HSPA data card on the HG532 so that your PC can connect to the Internet

through HSPA uplink. To create a HSPA uplink connection, do as follows:

Step 1 Log in to the Web-based configuration utility.

1. Launch the Internet Explorer on your computer. Enter http://192.168.1.1

in the address bar, and then press Enter.

2. In the displayed dialog box, enter the user name and the password, and

then click Login.

By default, both the user name and the password are admin. After the user

name and the password are verified, you can access the Web-based

configuration utility.

Step 2 Click Basic > WAN in the navigation tree to display the WAN Connection

Page.

Step 3 Click the connection whose access type is UMTS.

Step 4 Select Enable for WAN connection.

Step 5 Enter the APN and the Dial number that are provided by the network operator

in the APN text box and the Dial number text box.

Step 6 Enter the user name and password in the User name and Password text

boxes that you can configure.

Step 7 Click the Submit button to finish the UMTS settings.

If you want to verify the PIN code of your SIM card, then do as follows:

Step 1 Click Advanced > PIN in the navigation tree to display the PIN Page.

Step 2 Enter the original PIN number in the PIN text box.

Step 3 Click the Submit button to finish the settings on the PIN Page.

Use the default values for the other parameters. In general, they do not

need to be configured.