Hubbell Industrial Controls, Inc. | 4310 |
Fused Magnet Safety Disconnect Switch |
Catalog 4310 • August 2003 • New
Description
The 4310 fused magnet safety disconnect switch is designed to safely allow the operator of a lifting magnet to disconnect the highly inductive magnet while the magnet is still energized. Standard safety switches are not designed to safely disconnect an energized magnet.
The 4310 has (3) power poles. Two normally open power poles to disconnect the incoming power and a third normally closed power pole that shunts the magnets energy into a discharge resistor when the disconnect is switched to the off position.
Features
•Supplied in a NEMA type 3R wall mounting enclosure.
•Rated 300 VDC. Max
•All switches have a padlockable
•High capacity discharge resistor
Part Number | Fused At | Magnet Amps (Max) | Enclosure Dimensions | List Price E43 | |||
H | W | D | |||||
|
|
|
| ||||
|
|
|
|
|
|
| |
100 Amps | 67 | 29.00 | 12.63 | 10.00 | $1,900.00 | ||
200 Amps | 134 | 29.00 | 12.63 | 10.00 | $2,250.00 | ||
400 Amps | 267 | 31.25 | 24.00 | 13.29 | $6,130.00 | ||
|
|
|
|
|
|
| |
How To Order
Specify magnet operating current, cold.
Enclosure type is NEMA 3R
Order by part number
Hubbell Industrial Controls, Inc.
A subsidiary of Hubbell Incorporated
4301 Cheyenne Dr., Archdale, NC. 27262
Telephone (336)
