SECTION C: APPLY HEIGHT AND MOVING LABEL & SECURING SYSTEM

1.Carefully upright assembly. Apply moving system label (15) to front of pole as shown. Regulation rim height is 10 feet (3.05 m).

15

10 feet

(3.05 m)

WARNING!

TWO PEOPLE REQUIRED

FOR THIS PROCEDURE.

FAILURE TO FOLLOW THIS

WARNING COULD RESULT IN

SERIOUS INJURY AND/OR

PROPERTY DAMAGE.

WARNING!

DO NOT LEAVE

ASSEMBLY UNATTENDED

WHEN EMPTY; IT MAY TIP

OVER.

2.Place assembled unit to desired location. Fill tank with water (30 gallons (114 liters)) or sand (360 lb. (163 kg)) and snap tank cap (30) in place.

Insert T-strap (29) through slot on back of base as shown. Secure unit to ground by twisting tie down stake (27) into ground and hooking T-strap (29) onto tie down stake (27).

29

30

29

27

29

P/N 211879

03/04

18

Page 18
Image 18
Huffy 1000 manual Section C Apply Height and Moving Label & Securing System