SECTION B : OPERATING THE McCALL'S REBOUNDER

1.BALL-CHECK MECHANISM - STANDARD POSTION

1.Ball-Check Mechanism (17) holding ball.

2.For normal operation, pull down on Rebound Arm (16) which causes Ball-Check Mechanism (17) to drop, allowing ball to pass to arm.

3.Ball in arm position with Ball-Check Mechanism (17) holding next ball.

17

NOTE:

IF THE REBOUND ARM IS

RETURNING TOO FAST, OR IS

RETURNING TOO SLOW, THE AIR CHECKS (18) MAY HAVE TO BE ADJUSTED ACCORDINGLY.

16

18

Adjustment screw location

2.DRILLS REQUIRING BALL TO PASS WITHOUT STOPPING

1.Revearse position of Ball-Check Release (17) and pull down on Rebound Arm

(16)until Ball-Check Mechanism (17) drops out of position.

17

16

3.

BALL-CHECK MECHANISM - OUT OF POSITION

NOTE:

TO RE-ENGAGE

BALL-CHECK MECHANISM, REVERSE PROCEDURE IN STEP 2

P/N 211670

12/02

12

Page 12
Image 12
Huffy 1051 manual Section B Operating the McCALLS Rebounder