Huffy 211387 manual Height Adjustment, To Place In The Storage Position, Support Table

HEIGHT ADJUSTMENT

1. Rest unit on support table. Remove adjustment knob (9), carriage bolt (7), and washer (8) to extend or retract pole. Pole adjusts from 71/2’ to 10’.

Re-Insert Adjustment set (7, 8, 9) When pole is at desired height.

WARNING

BACKBOARD AND TOP POLE MAY ROTATE DURING HEIGHT ADJUSTMENT.

9

8

7

SUPPORT TABLE

TO PLACE IN THE STORAGE POSITION

1. Lower backboard and rim down to the lowest position (71/2’ (2.29 m)).

2. Remove adjustment knob (9), washer (8), and carriage bolt (7). Carefully rotate pole downward towards ground.

WARNING

DO NOT STAND BEHIND

SYSTEM WHEN PREPARING

FOR STORAGE.

3.	Secure pole assembly to tank (1) with carriage
	bolt (7), washer (8), and adjustment knob (9).
	Remove adjustment knob (24) from swivel
	bracket (21) and carefully rotate backboard
	assembly 180º.
	PLAY
	POSITION
24
	8
		8
		9
STORAGE		4. Secure backboard assembly in storage position
POSITION
		with adjustment knob set (24 and 8) as shown.

7

1

P/N 211387 5/99 10 printed on recycled paper