6. Install rod (7) through holes in bottom pole section (6) and eyebolt (8).
6
8
7
4
5
7. Insert pole assembly into tank assembly as shown.
6
WARNING! |
|
TWO PEOPLE REQUIRED | 7 |
| |
FOR THIS PROCEDURE. |
|
FAILURE TO FOLLOW THIS |
|
WARNING COULD RESULT | 8 |
IN SERIOUS INJURY AND/OR | |
PROPERTY DAMAGE. |
|
IMPORTANT!: |
DO NOT OVER |
TIGHTEN |
8. Carefully place unit on its side. Secure pole bottom (6) to tank with anchor strap (52), washers (9 & 13) and nut (10) as shown. Upright unit.
NOTE:
Keep unnecessary pressure off of the pole assembly when in this position. Two people recommended for this procedure.
IMPORTANT!: |
DO NOT OVER |
TIGHTEN |
6
1 
9
13
10
52
13 | 12/03 | P/N 211953C |
