![](/images/new-backgrounds/1298384/29838431x1.webp)
Attach upper and lower elevator tubes (21) to top pole section (14) using bolts (20) and
9.nuts (42) as shown. Attach pole cap (41) as shown.
41
21
42
WARNING!
TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.
21
21
21
20
20
10.
•Fit rim (58) securely into bracket (1) as shown.
•Install reinforcement bracket (3) onto “T” bolt (2) as shown.
•Install spring (4) onto “T” bolt (2) as shown.
•Install special nut (35) and washer (22) onto “T” bolt (2).
58
35
2
NOTE:
Tighten nut (35) until
flush with end of "T" bolt
(2) as shown here.
22
4
3
1
P/N 21154401 | 01/04 | 16 |