Huffy Universal Elevator Mount manual 106

3. NOTE: Two people recommended for this procedure. Hold angled brackets (6 and 7) on roof and keep u-channel

(2)upright. Measure from top of playing surface to upper elevator hole in u-channel. Distance should be 106” (2.7m).

NOTE: To achieve 106” (2.7 m) you may have to make some adjustments. Such as turning the tube over on the opposite end, and/or moving angled brackets backward or adding height to the enitre assembly with wood between angled brackets and roof.

Mark angled bracket locations on roof. Angled brackets (6 and 7) should be parallel to each other and 3-1/2” (8.9 cm) apart.

106”

(2.7 m)

6

7

WARNING

Minimum distance should be 106”

(2.7 m) from top elevator hole to playing surface. Homeowner must assume all responsiblilty for any personal or

3-1/2” (8.9 cm)

property damage if backboard height

is lower then recommended.

4.	Drill holes in roof. Position angled brackets and
	secure to roof. NOTE: Hardware for this
	procedure not included due to various roof
	construction materials and design structure.			5.	Keep u-channel (2) upright and position struts (3)
					on desired location on roof approx. 26”-30”
		2	3		(66-76 cm) apart. Level tube in all directions.
					Mark and drill holes. Secure struts in place.
					3
P/N 211125A		10/01		4