Step D. Mounting the pole base bracket

You may install the fixed mount on any structurally sound surface; either on a horizontal, or vertical, or a sloped surface, such as a roof or wall.

The pole is shipped attached to the base bracket (Figure 5). Mount the base bracket of this assembly to the structure with the appropriate hardware (not included). Once the base bracket is mounted, perform the following steps:

1.Insert the bubble level (Figure 6) into the end of the pole (pipe) opposite the base bracket. The bubble level fits into a shoulder inside the pole.

2.Loosen the pole

attachment fasteners at the base bracket so the pole

can swivel (Figure 5).

Figure 5 - Base bracket

Figure 6 - Bubble level

 

 

3.Swivel the pole until the

end of the pole where the BGAN terminal will be installed is vertical (as shown in Figure 1). Adjust the pipe position until the bubble is centered inside the circles on the top surface of the bubble level as shown in Figure 6.

4.Tighten the pole attachment fasteners on the base bracket (Figure 5).

Step E. Mounting the terminal bracket

1.The terminal can be mounted so its light-emitting diodes (LEDs) and control buttons face up—toward the sky, or down— toward the ground. Orient the terminal bracket (Figure 7) so the LEDs will face up or down, depending on how they can be most easily read.

2.Secure the terminal bracket to the terminal with the four provided tamper proof ¼ - 20 x 1/2 in. (12.5-mm) bolts. A special tool with a driver bit is provided (Figure 7).

Step F. Mounting the terminal bracket onto the pole

1.Slide the pole collar of the terminal bracket over the end of the pole. This collar is shown in Figure 7.

2.Leave the pole collar bolts loose to allow for azimuth

adjustment during pointing.

Figure 7 - Terminal bracket

 

3. Check to make sure you can read the LEDs.

 

4

3004090-0001 Revision A

Page 3 Page 5
Page 4
Image 4
Hughes 3004066-001, 3004090-0001 Step D. Mounting the pole base bracket, Step E. Mounting the terminal bracket
Page 3 Page 5

3004090-0001, 3004066-001 specifications

The Hughes 3004066-001 and 3004090-0001 series represent advanced satellite communication technologies designed for various applications, including military, commercial, and governmental use. These models are known for their innovative design and robust performance, catering to the ever-evolving demands of modern communication systems.

One of the standout features of the Hughes 3004066-001 is its enhanced data throughput capabilities. This model supports high-speed internet access, allowing users to transmit and receive large volumes of data efficiently. The technology employed includes advanced modulation techniques that optimize bandwidth utilization, making it ideal for applications requiring reliable connectivity in remote locations.

In contrast, the Hughes 3004090-0001 focuses on versatility, featuring a dual-band operation that enables seamless communication across different frequency bands. This flexibility makes it suitable for diverse operational scenarios, whether in maritime, aviation, or land-based environments. The model's robust design ensures it can withstand harsh conditions, providing reliable service even in extreme weather.

Both models incorporate state-of-the-art encryption and security protocols to safeguard data transmission. This aspect is critical, especially in defense and government operations where data integrity and confidentiality are paramount. The Hughes technology ensures that all communications are secure from potential cyber threats.

Power efficiency is another notable characteristic of the Hughes 3004066-001 and 3004090-0001. They are designed to operate effectively with lower power consumption, which is essential for satellite operations in remote areas. This energy efficiency not only reduces operational costs but also extends the lifespan of the equipment.

User-friendly interfaces and customizable configurations are also key features of these models. With intuitive control systems and a variety of options for scalability, users can easily adapt the technology to fit their specific needs. This adaptability is particularly beneficial for organizations that require quick deployment and flexibility in their communication solutions.

In conclusion, the Hughes 3004066-001 and 3004090-0001 models exemplify cutting-edge satellite communication technology. With their high data throughput, dual-band operation, robust security features, energy efficiency, and user-friendly designs, they cater to a wide range of applications, ensuring reliable connectivity and performance in the most challenging environments. As technology continues to advance, these models remain at the forefront of satellite communication innovation, meeting the demands of users worldwide.
Top Page Image Contents