RACK MOUNTING
/
BASS MASTER STAGEBOARD: The
BATT
can be
used as a stand-alone preamp or as an extension to an existing system. Hughes
&
Kettner offer special single and twin adaptors to faciliate 19” rack mounting.
A
Sound
Machines
STAGEBOARD is optionally available for easy on-stage
switching of two units (Unit1
/
Unit 2
/
Bypass
).
THE STAGE/LIVE SET-UP FOOTSWITCH:
A jack for connecting the
BATT
STAGEBOARD, designed to faciliate
on-stage switching between different
sounds such as two different
BATTs.
The
INSTRUMENT OUT socket of the
first
unit
is connected to the INPUT of
the second. The second unit‘s LINE
OUT jack is then used to control the
amplifier/speaker combination for the
stage sound. The PA OUT signal of each
unit can be connected to a separate
channel on the mixing console, and the
STAGEBOARD connected to both can
switch between the two.
PLEASE NOTE: VALVES NEED TO REACH THEIR CORRECT OPERATING
TEMPARATURE FOR THIS REASON, THE
BATT
NEEDS A FEW MOMENTS TO
WARM UP
AFTER
SWITCHING ON BEFORE
IT
IS READY FOR USE.
VALVES GENERATE HEAT,MAKESURETHATTHE AIRVENTSARE
NOT BLOCKED.
HOT VALVES ARE
SENSITIVE
TO SHOCKS. ALLOW THE UNIT TO COOL OFF
BRIEFLY BEFORE MOVING
IT.
AVOID JOLTING THE BAIT DURING
OPERATION.
TECHNICAL
DATA:
POWER RATING: APPROX 25
WATTS
INPUT SENSMTY: 300
mV/
-
10 dB
FUSE
VALUE:
315
mV
/
SLO-BLO.