Guide of Main Menu
Time Setting
You can set the Current Time and Wakeup Time in this mode. Furthermore, the Service Number in the Wakeup Time mode and Sleep Time (standby mode) can be set. When a VCR is connected, recording can be automatically done according to Wakeup/Sleep Time Setting.
Current Time
To set the Current Time, enter the Offset value using the standardized information of current service area.
The time setting will be used as the standardized time for the
Time Offset
Current time is based on TDT (Time and Data Table) at the stream of the current service.
Wakeup Time
Select the time when STB is turned on.
Use the Number buttons(0~9) on the remote control unit to enter your Wakeup Time.
Wakeup Service No.
Use the 
buttons to set the service number provided for the set Wakeup Time.
Use the TV/Radio(
)button on the remote control unit to toggle TV/Radio service.
Service Name
The Service Name that has been determined by the Wakeup Service No. will be shown.
Sleep Time
Depending on Time Setting, select the time when STB is turned off.
21
