Humminbird 385ci, 385CI DI COMBO NMEA Output, Digits Format, NMEA Output, DPT - Depth, GGA - GPS Fix Data, ZDA - Time and Date, GLL - Lat/Lon Position, MTW - Water Temperature

Digits Format

(Advanced)

Settings: Small tenths, Large tenths, No tenths;

Default = Small tenths

Digits Format adds a tenth decimal place to the readouts such as Temperature and Depth. Use the settings to change the display of the decimal place or remove it from the digital readouts. Examples of the different settings are displayed below. Also, see Select Readouts and Views.

Small tenths Large tenths No tenths

NMEA Output

(Advanced)

Settings: Off, On; Default = Off

NMEA Output turns the NMEA* output on or off. NMEA Output should be turned On if you connect the NMEA Output wires of the GPS Receiver cable to another NMEA-compatible device, such as an autopilot.

*NMEA 0183 is a National Marine Electronics Association standard for data communication.

NOTE: A separate purchase of accessory AS-HHGPS may be required for the NMEA output function.

The following NMEA sentences are output when NMEA Output is turned On:

DPT - DepthMTW - Water TemperatureGLL - Lat/Lon PositionGGA - GPS Fix DataRMC - Recommended Minimum Specific GNSS DataVTG - Course Over Ground and Ground SpeedZDA - Time and Date

Setup Menu Tab 128