Humminbird VHF255SW manual DSC Setup Create and Manage Group Mmsis, To enter Group MMSIs

www..reelschematic..com

DSC SETUP: CREATE AND MANAGE GROUP MMSIS

You can save up to three Group MMSI numbers and associated Group names. Group MMSI numbers always begin with a zero (0). You will only enter the last 8 digits of the Group MMSI, as the intial “0” is entered automatically.

To enter Group MMSIs:

1.From the DSC Setup Submenu, select GROUP MMSI. If existing Group Names and Group MMSIs are stored, they will be displayed. If there are no existing names, dashed lines will appear on the LCD instead.

2.To enter a Group Name and MMSI into a blank line, rotate the CH/ENTER knob to select the first desired character (A-Z, 1-9, space and back arrow "<") for the name. When the desired character is shown, press the CH/ENTER knob to select it; continue to select characters for the Group Name in this way. When the last digit is entered, you will be automatically advanced to the first MMSI digit.

NOTE: Some characters may be spaces; turn the CH/ENTER knob one click counterclockwise to remove a _ and replace it with a blank space, then press the CH/ENTER knob once more to select it and move to the next character.

3.Enter the MMSI number associated with that Group Name . The first digit is required to be a “0” (zero), and is entered automatically, so you only need to enter 8 digits to complete the 9 digit MMSI. A confirmation message will appear to ask you if you want to save the Group Name.

4a. Press the CH/ENTER knob to save the new entry.

or

4b. Press the CANCEL/WX key to terminate the process without saving; you will be taken back to the Group MMSI screen.

USER MMSID >GROUP MMSID INDIV REPLY DSC ENABLE POS REPLY

USER GROUP > - - - - - - - -

- - - - - - - - -

- - - - - - - -

GROUP NAME > - - - - - - - - - -

GROUP MMSID ID O - - - - - - - -

67