7 • Completing Your Installation With a Bowl Light Fixture (Continued)
Installing the Glass Bowl
7-3. First install B10 candelabra bulbs (60 Watt Maximum) into the sockets.
7-4. Attach the extra pull chains (included) to the fan pull chain and light pull chain using the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the extra chain.)
7-5. Thread the pull chains through the holes in the metal disc. Then, thread the pull chains through the hole in the center of the glass bowl.
7-6. Thread the pull chains through the grommet holes on the sides of the cover plate.
7-7. Place the cover plate up against the glass bowl. Align the holes in the cover plate and glass bowl.
7-8. Screw the finial onto the threaded rod end until tight.
Breakaway
Connector
Metal Disc 
Threaded
Rod
Glass Bowl
Cover Plate 
Finial
Light Bulbs
(B10
Candelabra
Base 60 Watt
Maximum)
Grommet Hole
45025-01 • 11/19/08 • Hunter Fan Company
